MPO/MTP to LC Panel

Product Description DESCRIPTION ·MPO series products(include MPO patch panel and MPO cassette) are designed to enable a fiber network to be installed and commissioned with maximum capacity in the short possible time and small space ·All the components are pre-assemblied and easy to be installed to the rack. It is a perfect solution for optical fiber installation and management FEATURE ·Easy for installation and operation ·Design for MPO ,for quickly network deploy and quick-fix solution ·19" standard structure ·Sliding tray design ·Hight capacity up to 96 cores in one 1U patch panel ·Available for the installation of FC/SC/ST/LC adaptor in front panel SPECIFICATION 1.Dimension: 482 x 300 x 1U mm 2.Max capacity up to 96 cores with 4pcs MPO cassette 3.Be available for FC/SC/ST/LC adaptor in front panel

Download

Manual of SC 24 4896 Optic Fiber Terminal Box

I.Application The product can be used on the terminal of the optical cables, different types and structures, the diameter of which are within 18mm() tray. II.Structural features. All property indexes are in accordance with National YD/T925-1997 Standard. The body make use of cold rolling steel sheet Strong adhesive force, artistic and durable. Distinctive design of 1-2 cable entrance and fiber exit of 1-24 cores assures flexibility. Cable entrance are sealed with oil resistance NBR to increase the flexibility. Users can choose to prick the entrance and exit. Overlapping fiber-melting tray and separate insulation earth unit make the disposition of the cores, expanding the capacity and cable-earthen flexible, convenient and safe. III.Main technical Specifications External Size: (length×width×height) 430x350x1U/2U/4U Weight:3.5kg optical fiber winding radius: ≥40mm extra loss of fiber tray:none fiber length left in tray:≥1.6m fiber capacity: 24/48/96cores working temperature: - 400C ~ + 600C lateral pressure-resistance: 500N shock-resistance:750N IV.Operations Peel the cable , take off the outer and inner housing, as well as loose contract tube, and wash off the filling grease, leaving 1.1~1.6m fiber and 20~40mm steel core. Fix the cable-pressing card and the cable, as well as the cable reinforce steel core. Lead the fiber into the melting and connecting tray, fix heat contract tube and melted tube to one of the connecting fiber. After melting and connecting the fiber, move heat contract tube and melted tube and fix the stainless (or quartz) reinforce core stick ,make sure the connecting point is in the middle of the housing pipe. Heat the pipe to make the two into one.Put the protected joint into the fiber-laying tray.(one tray can lay 12 cores) Lay the left fiber in the melting and connecting tray evenly, and fix the winding fiber with nylon ties. Use the trays from the bottom up. After all the fiber has been connected, cover the top layer and fix it. Position it and use the earth wire in accordance with the project plan. V.Packing List terminal case main body: 1 piece polishing sand cloth: 1 pcs melting and connecting mark: 1 pcs heat shrinkable sleeve: 2~24 pcs tie: 4~24 pcs

Download

DIN Rail Fiber Optic Splice Terminal Box Optical Fiber Patch Panel

Description: DIN Rail Fiber optic terminal box is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for mini-network terminal distribution, in which the optical cables, patch cores or pigtails are connected. All of the Din Rail Boxes can be fully populated. Application: Suitable for Pigtail, ribbon and bunch cable connect distribution Used for wall-mounted applications Used in FTTH, Telecommunications, CATV ect. Features: Aluminum, electrostatic painting Suitalbe for different adapters: FC, SC, ST, LC - 2pcs cable entry/exit ports; 12pcs pigtail entry/exit ports Splicing module of 12 fibers inside Max. 12pcs adapters can be loaded Front Panels:

Download